Choosing and buying an embroidery machine apparently takes a lot of criteria to think about. These criteria must be tailored to the needs and may be adjusted to the budget at that time. Each embroidery machine has its own trademark, although it is difficult to find what really fits, at least half of the following criteria are in accordance with the needs. Apart from that, check out the trusted embroidery company’s website as well.
Good embroidery machine criteria
The first is, of course, the quality of the machine itself. Can be used in all needs and price in accordance with the quality offered. Make sure also about the warranty provided by the machine whether it can easily be claimed if a time of damage.
The second is the size of the hoop on the selected embroidery machine. The size of the hoop is an important thing on an embroidery machine. Hoop with a size of 14 × 20 cm on average is located on the middle-level machine. This average number is used as a minimum size hoop on other machines. As for large-sized machines and has, many needles usually use a jumbo-sized hoop is measuring 40 × 26 cm. Hoop-sized jumbo is usually difficult to use then people usually need a small sized hoop, to meet these needs some stores also sell hoop for embroidery use.
The third is the number of stitches per minute (SPM) where minimal embroidery machines require a minimum of 500 SPM. The number of stitches per minute offered each machine is different, ranging from 400 to 1000.
Fourth note also the needle for the available yarn, whether it should be entered manually or can do it yourself without the need to be assisted. Do not forget the yarn cutters must also exist in a good embroidery machine.
For machines that use the computer note the presence of the presence of USB port and its ability to be connected directly with the PC. Use free or low-cost software to edit, translate images, rotate designs, adjust the size and calculate the time and number of stitches.
Machine for embroidery will be better if equipped with automatic cloth detection and also yarn pressure setting. The presence of sensors that can inform errors such as a broken thread, for example, can be an important criterion to consider.